Omnitron iConverter 10/100M2 – Fiber media converter – 100Mb LAN – 10Base-T, 100Base-FX, 100Base-TX – 8903N2EW

Performance monitoring. 802.3ah performance monitoring tools are used for the detection and notification of link performance (quality) faults. Ethernet data performance can deteriorate slowly over time, and the 10/100M2 allows the setting of error-per-second thresholds with event notification for early indication of issues that may be resolved prior to loss of service.

• Port bandwidth control and port access control. The enhanced bandwidth control feature controls bandwidth between the fiber and RJ-45 ports in increments.
• Fault detection. The 10/100M2 detects and indicates link faults, dying gasp and other critical events. The 10/100M2 also supports unidirectional link fault detection that indicates faults in either direction of the fiber link.
• Port statistics and optical performance statistics. The 10/100M2 supports reporting of utilization, port and optical performance statistics. Port statistics are available for different parameters for the RJ-45 and fiber ports. Additionally, full optical performance statistics are available on SFP fiber transceivers with a digital diagnostic interface.
• Remote loopback. Remote loopback is used for fault localization and link performance testing. When a 10/100M2 port is in loopback mode, all received link traffic is looped back and transmitted back unaltered. The statistics from the 10/100M2 port and the remote link partner can be compared for consistency.